Listing Grid Layout 3 –

Listing Grid Layout 3 –
Listing Grid Layout 3 -
Listing Grid Layout 3 – 3D Graphics (Firmware and BIOS)

1. Get Firmware.

2. Go into System Management and change this column in System System Management to System BootROM.

3. Change this column to System BootROM.

4. Right click on System BootROM and select Properties

5. Enter the name and manufacturer of the system.

6. Go to Windows System Settings and turn on and off system manager as indicated on this page.

You can verify your system boot ROM has the same version as the one provided by USB 3.0 or USB 2.0 compatible USB controllers as indicated in this link.

7. When prompted to verify, do so, click on OK
When you receive an error message, try to check your system boot ROM and verify that it has a version with the same name as the one specified in this link as indicated under this link.

8. Click OK to continue and confirm your system boot ROM was successfully verified.

7. When you are ready to proceed with the Windows setup, start your system by clicking on the Startup button and selecting Startup. Check that all of the BIOS or Software updates are set up correctly and you are ready to start.

9. Once done, go to your Computer, click on the Security tab, and then create a new BootROM File. In the same process, you can create your computer boot